Sand casting product
Castings

Sand casting

Exceptionally complex or detailed castings

Sand casting

Sand casting can create exceptionally complex or detailed castings and can be used to cast nearly any metal alloy.

Benefits

  • High production adaptability
  • Small quantities are possible
  • Large components can be made

Possible materials

  • Ductile cast iron (also ADI – Austempered ductile iron)
  • Grey cast iron
  • (Stainless) steel
  • Non-ferrous metal

Technical specifications

  • The commonly used casting tolerance table for linear dimensions is CT10 according to ISO 8062 (wall thicknesses CT11)
  • Weight: from 0.2 kg
  • Maximum dimensions: 2,000 mm
  • Casting wall thickness: ≥ 6-8 mm. Smaller is possible, depending on the structure
  • Draft angle: min. ± 1.5°
  • Geometric tolerances that are required for the function should be specified in the drawing
  • As far as possible, use uniform wall thicknesses to achieve a uniform solidification of material. In case of different wall thicknesses, inclusions and cracks, and even porosity may result

Finishing options

  • Electrolytic zinc plating
  • Blasting
  • KTL (Cataphoresis)
  • Primer, wet painting and powder coating
  • Hot-dip galvanising
Removing the sand

Process sand casting

A video that shows the process of sand casting.

Highlights sand casting

Get in touch

  • This field is for validation purposes and should be left unchanged.

Flagg avBelgium Belgium
+32 14 44 37 80
Flagg avDenmark Denmark
+45 98 920 65 6
Flagg avFinland Finland
+358 40 028 86 31
Flagg avGermany Germany
+49 93 21 26 29 10
Flagg avPoland Poland
+48 12 361 21 06
Flagg avSweden Sweden
+46 85 197 06 55
Flagg avSwitzerland Switzerland
+41 62 788 50 90
Flagg avThe Netherlands The Netherlands
+31 78 654 47 77