Low pressure die casting
Castings

Gravity die casting

Producing complex internal cavities

Gravity die casting (low pressure die casting)

Complex internal cavities can be produced with gravity die casting (low pressure die casting).

Benefits

  • More possibilities compared with sand casting
  • Consistent dimensional accuracy
  • Possibility to insert metal parts in the casting (such as bolts, pipes etc.)
  • Highly suitable for finishing operations

Possible alloys

  • Aluminium alloys
  • Magnesium alloys
  • Copper alloys

Technical specifications

  • The commonly used casting tolerance table for linear dimensions is CT8 according to ISO 8062 (wall thicknesses CT9)
  • Weight: 30 grams to 80 kg
  • Casting surface roughness: ± Ra 6.3 μm
  • Maximum dimensions: 1000 mm
  • Casting wall thickness: ≥ 3 mm. Wall thickness should be distributed as evenly as possible
  • The geometric tolerances that are required for the function should be specified in the drawing
  • The minimum draft angle depends on the height of the wall or rib. The higher it is, the smaller the required minimum draft angle. Minimum draft angle from 1°, starting from 2° – 3°
  • The position of the ejection pins must be discussed with the customer

Finishing options

  • Technically anodising, but not decorative (it turns a mottled matt black)
  • Blasting
  • Vibra-polishing
  • Primer, wet painting and powder coating
Tooling production

Process gravity die casting

A video that shows the process of gravity die casting (low pressure die casting).

Highlights gravity die casting

Get in touch

  • This field is for validation purposes and should be left unchanged.

LippuBelgium Belgium
+32 14 44 37 80
LippuDenmark Denmark
+45 98 920 65 6
LippuFinland Finland
+358 40 028 86 31
LippuGermany Germany
+49 93 21 26 29 10
LippuPoland Poland
+48 12 361 21 06
LippuSweden Sweden
+46 85 197 06 55
LippuSwitzerland Switzerland
+41 62 788 50 90
LippuThe Netherlands The Netherlands
+31 78 654 47 77